[2025 Update] How To Fix iPad Blinking Apple Logo?

An iPad stuck blinking the Apple logo is a common issue that many users face, often leaving them unsure of what to do next. Questions like, “Why my iPad keeps turning on and off?” or “How do I fix my iPad stuck on the Apple logo?” frequently pop up on forums like Apple Community and Reddit.

This problem, often caused by software glitches or hardware issues, can disrupt your iPad’s functionality and leave you searching for reliable solutions. In this guide, we’ll explore the possible causes of this problem and walk you through the top methods to fix it effectively.

Why does my iPad keep Blinking Apple logo?

If you’re seeing the blinking Apple logo on iPad, it’s likely due to software glitches or hardware-related problems. A corrupted iOS update, incomplete restoration process, or even a failing battery could trigger this issue. Additionally, faulty lightning cables or USB ports can interrupt normal booting, causing the device to flash the logo repeatedly. Identifying the root cause is the first step in resolving this frustrating issue.

Top 5 Ways to Fix iPad Blinking Apple logo

Looking for iPad flashes Apple logo fix? Here are five proven methods to fix an iPad flashing the Apple logo:

Method	Ease of Use	Data Loss	Effectiveness
Hard Reset	Easy	No	Moderate
iOS Repair Master (e.g., ReiBoot)	Easy	No	High
Inspect USB Port and Cable	Easy	No	Low
Restore via iTunes	Moderate	Yes	High
Fix via DFU Mode	Advanced	Yes	High

Way 1: Hard Reset your iPad

Performing a hard reset is one of the quickest ways to address an iPad Apple logo blinking. This method refreshes the device’s software without erasing any data.

Steps to Hard Reset an iPad:

1. For iPads with a Home Button: Press and hold the Home and Power buttons simultaneously until the Apple logo appears. Release both buttons.

2. For iPads without a Home Button: Press and release the Volume Up button, then the Volume Down button, and finally, press and hold the Power button until the Apple logo reappears.

Way 2: Fix iPad Blinking Apple logo via iOS Repair Master with 1 Click [No Data Loss]

Dealing with an iPad that flashes the Apple logo, gets stuck on a black screen, or enters a boot loop can be frustrating and inconvenient. These issues are often caused by software glitches, incomplete updates, or faulty hardware like lightning cables or charging ports. While basic troubleshooting methods like a hard reset or inspecting your charging accessories can sometimes resolve the problem, more persistent cases require advanced solutions.

This is where Tenorshare ReiBoot becomes an invaluable tool. Unlike traditional methods such as iTunes restores, ReiBoot provides a seamless and effective way to repair iOS issues without the risk of data loss. It is designed for simplicity, making it easy for anyone to use, and it supports all iOS devices and versions. Whether your iPad is stuck in a boot loop or blinking the Apple logo, ReiBoot’s specialized repair functions can restore your device to normal in just a few clicks.

Steps to Fix the Blinking Apple Logo Using ReiBoot:

1. Visit the official Tenorshare website and install ReiBoot on your PC or Mac. Use a lightning cable to connect your iPad to the computer. Launch ReiBoot.

2. Click on Start and choose Standard Repair. This mode ensures no data loss.

3. ReiBoot will prompt you to download the appropriate iOS firmware for your iPad. Click Download.

4. Once the firmware is ready, click Start Standard Repair. ReiBoot will repair your iPad and restart it without the blinking Apple logo issue.

Once the Standard Repair process will complete, your iPad will have a fresh firmware install which will surely fix all sorts of unknown reasons behind iPad blinking Apple logo issue.

Ways 3: Inspect the USB port and lightning cable

A damaged lightning cable or a faulty USB port can interrupt the communication between your iPad and other devices, leading to the iPad screen blinking.

Steps to Inspect USB Port and Cable:

1. Check for visible damage, such as fraying or bent connectors, on your lightning cable.

2. Use a different lightning cable to rule out the possibility of cable issues.

3. Inspect the USB port on your device and computer for debris or damage.

4. Clean the ports gently with a soft brush or compressed air if needed.

Way 4: Restore iPad with iTunes

Restoring your iPad with iTunes can resolve more stubborn issues causing the blinking Apple logo. Note that this process erases all data, so ensure you have a backup.

Steps to Restore iPad with iTunes:

1. Connect your iPad to your computer using a lightning cable and open iTunes.

2. In iTunes, click on the Device icon in the left side bar, then select Summary.

3. Click Restore. Once completed, set up your iPad as new or restore from a backup.

Way 5: Fix iPad Flashing Apple Logo Via DFU mode

The Device Firmware Update (DFU) mode is the most advanced troubleshooting method for an iPad flashing the Apple logo. It reinstalls the firmware from scratch, resolving both software and firmware-related issues.

Steps to Enter DFU Mode and Restore Your iPad:

1. Connect your iPad to your computer and open iTunes.

2. Enter DFU Mode:

For iPads with a Home Button: Press and hold the Home and Power buttons for 10 seconds. Release the Power button but continue holding the Home button until iTunes detects the iPad in DFU mode.
For iPads without a Home Button: Quickly press Volume Up, then Volume Down, and hold the Power button for 10 seconds. While holding Power, press and hold Volume Down for another 5 seconds. Release Power but continue holding Volume Down until iTunes detects the device.

3. In iTunes, choose Restore iPad and follow the on-screen instructions.

While DFU mode can fix severe issues, it should only be used as a last resort due to its complexity.

Hot Questions

1.Why is my iPad Apple logo flashing when plugged in?

If your iPad’s Apple logo flashes when plugged in, it’s often due to a faulty lightning cable, a damaged charging port, or insufficient power supply. Ensure you’re using an Apple-certified cable and a functional power adapter.

2. What to do if my iPad is stuck on Apple logo and black screen?

An iPad stuck on the Apple logo and black screen can indicate a failed iOS update or software corruption. A hard reset might help, but if the issue persists, using a professional repair tool like Tenorshare ReiBoot can provide a quick, data-safe solution.

3. How do I fix my iPad stuck on the Apple boot loop?

The Apple boot loop is typically caused by software issues or incomplete iOS installations. Methods like restoring the iPad via iTunes or fixing the issue with Tenorshare ReiBoot can break the loop and restore normal functionality.

The Bottom Line

Dealing with an iPad flashing the Apple logo or stuck in a boot loop can be frustrating, but it’s not an irreversible problem. From simple troubleshooting like a hard reset to advanced repairs with tools like Tenorshare ReiBoot, there’s a solution for every level of complexity.

ReiBoot, in particular, stands out for its ability to resolve iOS issues without data loss, offering a reliable and easy-to-use solution for fixing the iPad blinking Apple logo. Whether it’s a software glitch or a hardware issue, taking the right steps can restore your iPad’s functionality and save you from unnecessary stress.